1-1/8 Inch x 20 Feet Soft Type Backer Rod for Gaps & Joints

Soft Type Backer Rod is a soft, non-gassing, pliable, bi-cellular backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants and also helps sealant to assume the optimum hour-glass shape. Sealants will not adhere to it; no bond breaker is required. Soft Type Backer Rod is a round, black, extruded bi-cellular polyethylene backer rod with a water resistant outer skin. It is compatible with most known cold applied sealants such as urethane, silicone,acrylic, butyl, polysulfides, latex, and chinking sealants. Specific Uses Include: Especially suited for applications with irregular and varying joint widths where standard closed cell backer rods are not appropriate and where bubbling concerns are critical. May also be used in place of standard closed-cell backer rod in most applications. Common applications include expansion and contraction joints, window glazing, curtain wall construction partitions, parking decks, bridge and highway construction pavement maintenance, and log home chinking. Limitations: Do not use with hot-applied sealants. Sealant compatibility should be confirmed by the sealant manufacturer. Backer Rod should be installed with a roller or blunt, flat-sided tool. Avoid puncturing, stretching and over compression. Temperature Limits: -90"F to 190"F Installation: Joint or opening must be free of all contaminants (including curing compounds and form-release agents), loose materials, dry and free of frost. Install between 25% - 50% compression. With a bluntinstrument or roller, seat the Backer Rod to depth recommended by sealant manufacturer. Product will not stain or adhere to sealants. Density: 1.6-2.0 lbs/ft3 Water Absorption: less than 0.03 grams/cc Compression Recovery: > 97% Tensile Strength: > 25-50 psi Meets or exceeds requirements of ASTM C1330 type B

• Makes professional joints that last
• Helps fill in and insulate Jumbo caulk joints and allows the caulking to absorb more movement
• Caulking adheres to the sides of the joint, but not to the filler rope
• Made of closed cell poly foam
• Complies with ASTM C 1330, Type C