SCULPFUN iCube Pro Laser Engraver, 5000mW Desktop Laser engraving machine with Smoke Filtration System, Laser Class 4 Laser cutter, 0.01mm Carving Precision, 125×125mm Engraving Area(5W)

Model: SCULPFUN iCube Pro 5WInput Power: 60WOptimal Focusing Distance: 40mmSupport System: Win7/Win8/Win10/Win11/MAC/IOS/Android/LinuxOperation Application Software:Computer: LightBurnGRBLMobile Phone: APPProduct Weight: 3.2KGProduct Size(LWH): 262x300x226mmPackage Weight: 4.75KGPackage Size: 318x282x360mm/12.5x11.1x14.1inSome Important Tips:About the Engraving Materials:Note that any specular reflective objects can not be engraved otherwise the reflection will damage the head.About the filter:A free set of cotton filter is attached with purchasing it needs to be replaced periodically to ensure the filter effect.About the lens:A free lens is attached in the package with purchasing which also can be ordered separately.Packing List:1 x Engraver1 x U-Shaped Shield1 x Metal Plate1 x Head1 x Power Adapter1 x Power Cable1 x Type-C Data Cable1 x Cotton Filter Set1 x Lens Repa Kit1 x Goggle1 x Basswood d1 x MDF1 x Installation Instruction、Precautions:●Because of the powerful it is forbidden to run the engraving machine unattended. Please pause it if you're not around.●Please refer to the user manual for detailed machine instructions and parameter settings.●Please install the protective cover before operating the machine; if not a pa of goggles is needed.●Do not touch the with your hands or it may burn your hands.●Please avoid be impact on the machine.●Children under 14 are not allowed to use this product and children over 14 need adult supervision.●Do not apply the directly to any specular reflective objects as this may cause injury to the operator or burn.

• ▶【All-in-One Engraving and Cutting】The iCube Pro laser engraver adopts a 5000mW diode laser, featuring an ultra-fine 0.06mm laser focus, which delivers exceptional cutting penetration and engraving precision. It can cut soft wood up to 10mm thick and black acrylic up to 6mm thick. Of course, in addition to engraving on wood, leather, and bamboo, it can also engrave on ceramics and stainless steel (it is recommended to blacken the surface for more remarkable engraving results).
• ▶【Incredibly Fast Working Speed】The iCube laser engraving machine features an all-new 32-bit high-speed engraving motherboard, enabling a maximum engraving speed of 10000 mm/min. It is faster than other frame-type engraving machines, which greatly enhances engraving efficiency. For instance, engraving a simple Christmas bell pattern on wood takes only 2 minutes, putting an end to the era of long waits beside traditional engraving machines for the engraving results.
• ▶【Diversified Operation Methods】The iCube Pro laser cutter supports both smartphone and computer connection. Undoubtedly, you can either control the machine using the SCULPFUN mobile App, or connect it to a computer via Bluetooth or Type-C data cable (Note: LightBurn and LaserGRBL software are available to control the machine). Surprisingly, our exclusive SCULPFUN App is fully functional and simplifies the operation process, allowing beginners to start their engraving journey more quickly!
• ▶【Built-in Smoke Filtration System】The iCube Pro laser cutting machine comes with a built-in smoke filtration system, meaning it can effectively filter the smoke generated during engraving and cutting without the need for a smoke exhaust enclosure. This allows you to freely engrave and cut in offices or homes, eliminating pungent smoke and letting you enjoy the fun of engraving!
• ▶【Reinforced Safety Protection】Firstly, the detachable laser filter encoslure allows you and people around to directly observe the laser without wearing goggles. Secondly, when the temperature inside the laser engraver exceeds 45°C, the temperature alarm device will sound an alarm and immediately stop the machine. In addition, the gyroscope detection, limit switches, and emergency stop button ensure safety in case of machine tilting, collision, or accidents.
• ▶【Optimized Desktop Design】The iCube measures only 262×300×226mm, saving space when placed on a desk. Furthermore, it adopts a unique semi-open structure design, allowing you to place the object to be engraved either inside the machine or place the machine on the surface of large objects for engraving - there is no restriction on the volume of the object (Note: Although there is no limit to the size of the object to be engraved, its engraving area remains 125×125mm).